Krebson Vinyl and Record Player Stand
Use the Custom Order button above for custom requests! Please see the home page for current lead times.
The Krebson Vinyl and Record Player Stand was my first original design, and has been a favorite amongst customers. This model measure is available in 3 standard dimensions, but can be customized to fit your unique space and equipment needs.
In 36” models, the three sections are evenly divided. In models larger then 36”, the center console section is typically 12” wide, and the remainder split between the outside sections. This is completely configurable for your custom piece.
There's a bit of retro Mid-Century vibe in this piece. The inside edges are chamfered at 30 degrees and left round in the corners, dramatically softening the appearance of the console. All four corners are mitered and burnished allowing for a natural flow of wood grain around the piece. I finish all my pieces with Rubio Monocoat. Rubio brings out all the natural beauty of walnut, and is very durable.
Shop made solid walnut legs are a customer favorite to pair with this case, and are available in lengths from 4" to 16", for an overall height between 20" - 32". Each set of custom legs in unique, are angled and tapered, and mounted at an angle to the corner. This design is customizable as well, if you prefer something straighter or more traditional. A variety of other legs are available as detailed below, each offering an additional unique look.
I mill all my own lumber in my shop, and I select and design every piece to capture as much character as possible on every face. These console tables are all solid wood, with the exception of the back panel, which is walnut veneered plywood.
Some Assembly is required - the legs are packaged separately to avoid damage, and must be attached after delivery. Assembly is pretty simple, and only requires a phillips head screw driver.
It truly means a lot to me that you would consider having something I built in your home!
Because of this item's size, it ships freight through UShip. The carrier will call you to make a delivery appointment.
Do you need something bigger or smaller customized to your space? Custom orders can be fulfilled in as little as four weeks! Contact me now for quotes!!
jaybergcustoms@gmail.com
Use the Custom Order button above for custom requests! Please see the home page for current lead times.
The Krebson Vinyl and Record Player Stand was my first original design, and has been a favorite amongst customers. This model measure is available in 3 standard dimensions, but can be customized to fit your unique space and equipment needs.
In 36” models, the three sections are evenly divided. In models larger then 36”, the center console section is typically 12” wide, and the remainder split between the outside sections. This is completely configurable for your custom piece.
There's a bit of retro Mid-Century vibe in this piece. The inside edges are chamfered at 30 degrees and left round in the corners, dramatically softening the appearance of the console. All four corners are mitered and burnished allowing for a natural flow of wood grain around the piece. I finish all my pieces with Rubio Monocoat. Rubio brings out all the natural beauty of walnut, and is very durable.
Shop made solid walnut legs are a customer favorite to pair with this case, and are available in lengths from 4" to 16", for an overall height between 20" - 32". Each set of custom legs in unique, are angled and tapered, and mounted at an angle to the corner. This design is customizable as well, if you prefer something straighter or more traditional. A variety of other legs are available as detailed below, each offering an additional unique look.
I mill all my own lumber in my shop, and I select and design every piece to capture as much character as possible on every face. These console tables are all solid wood, with the exception of the back panel, which is walnut veneered plywood.
Some Assembly is required - the legs are packaged separately to avoid damage, and must be attached after delivery. Assembly is pretty simple, and only requires a phillips head screw driver.
It truly means a lot to me that you would consider having something I built in your home!
Because of this item's size, it ships freight through UShip. The carrier will call you to make a delivery appointment.
Do you need something bigger or smaller customized to your space? Custom orders can be fulfilled in as little as four weeks! Contact me now for quotes!!
jaybergcustoms@gmail.com
Use the Custom Order button above for custom requests! Please see the home page for current lead times.
The Krebson Vinyl and Record Player Stand was my first original design, and has been a favorite amongst customers. This model measure is available in 3 standard dimensions, but can be customized to fit your unique space and equipment needs.
In 36” models, the three sections are evenly divided. In models larger then 36”, the center console section is typically 12” wide, and the remainder split between the outside sections. This is completely configurable for your custom piece.
There's a bit of retro Mid-Century vibe in this piece. The inside edges are chamfered at 30 degrees and left round in the corners, dramatically softening the appearance of the console. All four corners are mitered and burnished allowing for a natural flow of wood grain around the piece. I finish all my pieces with Rubio Monocoat. Rubio brings out all the natural beauty of walnut, and is very durable.
Shop made solid walnut legs are a customer favorite to pair with this case, and are available in lengths from 4" to 16", for an overall height between 20" - 32". Each set of custom legs in unique, are angled and tapered, and mounted at an angle to the corner. This design is customizable as well, if you prefer something straighter or more traditional. A variety of other legs are available as detailed below, each offering an additional unique look.
I mill all my own lumber in my shop, and I select and design every piece to capture as much character as possible on every face. These console tables are all solid wood, with the exception of the back panel, which is walnut veneered plywood.
Some Assembly is required - the legs are packaged separately to avoid damage, and must be attached after delivery. Assembly is pretty simple, and only requires a phillips head screw driver.
It truly means a lot to me that you would consider having something I built in your home!
Because of this item's size, it ships freight through UShip. The carrier will call you to make a delivery appointment.
Do you need something bigger or smaller customized to your space? Custom orders can be fulfilled in as little as four weeks! Contact me now for quotes!!
jaybergcustoms@gmail.com